Low power solenoid valve is usually with power consumption below 5 Watt.This valve uses improvised Solenoid operator & a solenoid enclosure with suitably modified electo magnetic parameters. The power consumption is lowered without much effect on the pulling force.

This ensure that even with Low power consumption, Valve continues to Operates without a significant effect on the operating characteristics.Lower Power consumption also means smaller power supply. Low Power valve has significant lower temperature rise (<= 30 ^OC degree, on Continues energization) This offers much longer life for the solenoid.

The valves are available for both AC & DC operating Voltage & in a variety of enclosures like DIN plug, Integral Junction box weather as well as Explosion proof.

SPECIFICATION

Enclosure:

1.   General Purpose Flying lead / Plug-in
2.   Weather-Proof: Flying lead & Plug in type, Terminal Box as per IS 13947
3.   Explosion-Proof with Junction box as per IS 2148 group I, IIA, IIB and IIC
4.   Explosion-Proof with Junction box as per ATEX, INMETRO, CE and UL (in process) available.

FEATURES

1.   Highly efficient operator capable of operating with 0.4W coil & pressure rating of 8 bar.
2.   Direct acting valve can be supplied with 5W coil.
3.   Internal / External pilot operated valve can be supplied with 2W coil.
4.   Wide range of 2, 3, 5, ports Direct/Pilot operated valves can be supllied Ideally suited for field bus mounting.
5.   Low temperature rise.
6.   Two wire latch coil can also be supplied (Require reversal of power supply for changing valve Position)

3/2 Normally Closed:P3004, P3007, P3001.

Orifice: 1.8, 2.5, 6, 10, 16 mm
Pressure: 0 10 bar

3/2 Normally Open: P3009, P3003.

Orifice: 6, 10, 16 mm
Pressure: 2 - 10 bar

3/2 Universal: P3002, P3005, P3008, P3010, P3011, P3006.

Orifice: 1.8, 2.5, 5, 6, 10, 16 mm
Pressure: 0-10 bar

5/2 MONO: P5007, P5011, P5003, P5009, P5002, P5007, P5001.

Orifice: 6, 10, 12, 16, 25 mm
Pressure: 2-10 bar

5/2 BISTABLE: P5008, P5012,P5004, P5006, P5010,P5005.

Orifice: 6, 10, 12, 16, 25 mm
Pressure: 2-10 bar

Certification :

ATEX, INMETRO, INDIAN: CCOE, DGMS, BIS.

Rotex has achieved ISO 9001:2000 by TUV and approvals like ATEX, PED, INMETRO, UL, CCOE, CMRI and Bureau of business standards for its explosion proof application for solenoid valves and limit switches. Also Rotex conforms to some of the highest design standards in India and the world, including: En, ISO, ANSI, ASTM, BIS, PIN, NSCE AND IEEE.

Flameproof testing as per IS : 2148 - 2004 (IEC 60079-1/2001) and weatherproof testing as per IS : 12063-1987 for IP-67 of your enclosure for Flameproof cum Weatherproof Limit Switch Housing, in cast aluminum alloy construction, designated by Model : DNLE for use in Gas Group : IIC and Zone 1.

All of ROTEX Intrinsically safe Solenoid Solution are certified Ex ia IIC, T6.