ROTEX HIGH PERFORMANCE POWER CYLINDER IS INTEGRATED WITH HIGH QUALITY

AND EXCELLENT DESIGN FEATURES WITH NEARLY UNLIMITED DURABILITY.

FEATURES:

1.    All the power cylinders can be supplied with optional accessories shown in this catalogue.
2.    Some accessories are factory fitted.
3.    Some can be installed at the later stage.
4.    It is highly recommended that you consult ROTEX for complete installation,
application, etc.
5.    Air lock relays are more practical to be considered during various power failure made.

POWER CYLINDER

Rotex power cylinder can be installed in various corrosive environments by selecting suitable material.
Bellows and guards can be provided for physical protection.

MATERIAL OF CONSTRUCTION

Cover: Aluminum, CS, SS 304
Tube: Aluminum, CS, SS 304
Piston Seal: NBR, Viton
Rod Seal: Polyurathane
Cushioning: Optional
Bellows: Neoprene

Cylinder Mountings as per ISO 6431 and ISO 6432.
All accessories can be installed or dismantled without removing cylinder covers.

JUNCTION BOX

1.   Provides 2 x (1/2)NPT input connection
2.   6-way connector strip for connection
3.   Switches are prewired with cable glands
4.   Housing, pressure die cast, Epoxy powder coated
5.   SS 316/ CF8M on request

POSITIONER

MODEL                                  RYT 1200R                    RYT 1000R

Feedback                                  Spring                           Spring
Control                                   Pneumatic                     Electronic
Signal                                    0,2-1 bar                        4-20 mA

                                               or 3-15 psi                      or 0-10 V
Nominal flow                            600 NI/ min                    600 NI/ min
Consumed flow                       < 15NI/ min                   < 15NI/ min
Sensitivity                              < 0.005 bar                    < 0.1 mA
Weight                                       1.0 kg                           1.0 kg
Operating Temperature            -10 °C~70 °C                 -10°C~70 °C

MANUAL OVERRIDE

1.    Latch wheel for auto/ manual
2.    Self locking on external force
3.    Safety key for excessive load
4.    Strokes up to 1800 mm
5.    Shaft made of special wear resistant steel for long life
6.    Type M01, M04, M06, HYMO

MANUAL OVERRIDE

Manual Override is used to operate the cylinder in an air failure mode. The latch wheel engages the lead nut. The hand wheel rotates the Lead Screw. When the Screw rotates, the nut along with the arm moves the piston rod.

MATERIAL OF CONSTRUCTION

Body : Cast iron
Shaft : High-grade steel
Bearing : Sintered bronze

AIRLOCK RELAY

- 5/2 airlock relay                                   - Type ALR5F set at 3.5 bar
- Type ALR5A Adjustable 3-10 bar           - Zero leakage
- Type ALR5S for signal failure                - Auto release
- Bypass for manual operation                 - Choose option from page - -Can be                                                                  installed directly on 5/2 &

-5/3 single or double solenoid ROTEX

 valve

POSITIONER

RYT - 1200R

- Cam operated feed back
- Reversible type, can be reversed at site
- Sensitivity 0.1%
- Repeatability 0.15%
- Input 3 - 15 psi

RYT - 1000R with built in I/P convertor with input 4 - 20 mA.

RYT Smart 2500R

- Sensitivity 0.1%

- Auto setup

- Programmable stops from 4 - 20 mA.

Certification :

Rotex has achieved ISO 9001:2000 by TUV and approvals like ATEX, PED, INMETRO, UL, CCOE, CMRI and Bureau of business standards for its explosion proof application for solenoid valves and limit switches. Also Rotex conforms to some of the highest design standards in India and the world, including: En, ISO, ANSI, ASTM, BIS, PIN, NSCE AND IEEE.

Flameproof testing as per IS : 2148 - 2004 (IEC 60079-1/2001) and weatherproof testing as per IS : 12063-1987 for IP-67 of your enclosure for Flameproof cum Weatherproof Limit Switch Housing, in cast aluminum alloy construction, designated by Model : DNLE for use in Gas Group : IIC and Zone 1.